TH Series Inserts / Spacers

TH1.6 Series
TH1.6 Series
TH1.6 Series
TH1.6 Series

TH1.6 Series


•This Spacer is mounted on PCB by inserting into through-hole.
Screws can be inserted both from component and from solder side.
Taping type has adsorption seal for vacuum pick. It needs to be removed after reflow.
•Adaptive PCB Thickness....1.6t and over
(other PCB thickness applicable)
* Mounter should have automatic recognition system
•Current Capacity....
TH-1.6--M2………20A
TH-1.6--M2.6…… 20A
TH-1.6--M3………30A
•Dimensions....
M2 P=0.4
M2.6 P=0.45
M3 P=0.5
•Finish....Sn plating over Ni
•Material....Brass
•Recommended Metal Mask Thickness....150~200µm
•Tightening Torque....
TH-1.6--M2……… 1.5kgf-cm(14.7N-cm) and below
TH-1.6--M2.6…… 3kgf-cm(29.4N-cm) and below
TH-1.6--M3……… 5kgf-cm(49N-cm) and below (X-direction)
3kgf-cm(29.4N-cm) and below (Y-direction)