TH Series Inserts / Spacers

TH0.8 Series
TH0.8 Series
TH0.8 Series
TH0.8 Series

TH0.8 Series

  • This Spacer is mounted on PCB by inserting into through-hole.
  • Screws can be inserted both from component and from solder side.
  • Taping type has adsorption seal for vacuum pick. It needs to be removed after reflow.
  • Adaptive PCB Thickness....0.8t and over (other PCB thickness applicable)
  • Current Capacity....
    TH-0.8-M2...20A
    TH-0.8-M2.6...20A
    TH-0.8-M3...30A
    TH-0.8-M4...40A
  • Finish....Plated Sn over Ni base
  • Material....Brass
  • Recommended Metal Mask Thickness....150-200µ
  • Tightening Torque....
    TH-0.8-M2...1.5kgf-cm (14.7N-cm) and below
    TH-0.8-M2.6...3kgf-cm (29.4N-cm) and below
    TH-0.8-M3...5kgf-cm (49N-cm) and below (X-direction)
    TH-0.8-M3...3kgf-cm (29.4N-cm) and below (Y-direction)
    TH-0.8-M4...8kgf-cm (78.4N-cm) and below