TH Series Inserts / Spacers

TH Series
TH Series
TH Series

TH Series

•Can Change through hole to threaded hole(M1.0, M1.2, M1.4, M1.6, M1.7, M2, M2.6, M3). Taping type has adsorption seal for vacuum pick. It needs to be removed after reflow.

•Adaptive PCB Thickness....1.6t and over(TH-1.6 series), 0.8t and over(TH-0.8series) (other PCB thickness applicable)
 •Current Capacity....
TH-0.8-M1.0…… 10A
TH-1.6-M1.7…… 15A
TH-0.8-M1.2…… 12A
TH-1.6-M2………20A
TH-0.8-M1.4…… 12A
TH-1.6-M2.6…… 20A
TH-1.6-M1.6…… 15A
TH-1.6-M3………30A
•Finish....Sn plating over Ni
•Material....Brass
•Recommended Metal Mask Thickness....150~200μm
•Tightening Torque....
TH-0.8-M1.0…… 0.3kgf-cm(2.94N-cm) and below
TH-0.8-M1.2…… 0.6kgf-cm(5.88N-cm) and below
TH-0.8-M1.4…… 1.0kgf-cm(9.8N-cm) and below
TH-1.6-M1.6…… 1.5kgf-cm(14.7N-cm) and below
TH-1.6-M1.7…… 1.5kgf-cm(14.7N-cm) and below
TH-1.6-M2……… 1.5kgf-cm(14.7N-cm) and below
TH-1.6-M2.6…… 3kgf-cm(29.4N-cm) and below
TH-1.6-M3……… 5kgf-cm(49N-cm) and below (X-direction) 3kgf-cm(29.4N-cm) and below (Y-direction)